Cracks In Fitting Holes
Remove all loose particles. Clean surface.
Dye Rex-Lith Wood with Color Touch-Up. Then mix with the appropriate quantity of hardener.
Put a plastic cap or lid into the fitting hole and apply the Rex-Lith Gel Filler to the damaged area (mould).
Before the Rex-Lith has fully cured, coarse projectings can be carefully cut off with a chisel.
Level the filled area with the Metal Planer.
Stretch a piece of Sandpaper ‘dry’ tight around the Cork Sanding Block and remove final projections while sanding the surrounding area. Remove sanding dust afterwards.
Match filled damage to the color of the surrounding area by misting with PF Covering Lacquer from a distance of 12-16 inches – do not spray too wet. Repeat two or three times.