Damaged Edges 2

Browse:

Damaged Edges 2

STEP 1

Remove all loose particles. Clean surface.

Products required:

STEP 2

Cut damaged edges straight down with the Edge Planer.

Products required:

STEP 3

Pre-color damage in the substrate with the Brush-Fix Pigment Pen matching the surrounding area.

Products required:

STEP 4

Choose several color shades of Hard Wax PLUS matching the surrounding surface and hold wax sticks in turns to the tip of the Hot Knife.

Let color wax mixture flow into the damage in the direction of the grain.

Products required:

STEP 5

Remove excess wax with the Special Filler Applicator. Note: Sharp grooves on the flat area, Rounded grooves at edges.

Products required:

STEP 6

Make an intermediate sealing by misting with Special Repair Lacquer from a distance of 12-16 inches – do not spray too wet.

Restore the grain with the Touch-Up Paint Box and the Squirrel Hair Brush.

Products required:

STEP 7

Seal completed repair by misting with Special Repair Lacquer from a distance of 12-16 inches – do not spray too wet.

Products required:

Piano and Furniture Finish Supplies