Deep Scratches (PVC / Fiberglass)
STEP 1
STEP 2
Pre-color damage in the substrate with the Color Edge Pen or Color Edge Pen Plus.
STEP 3
Choose the appropriate colors of Hard Wax Plus corresponding to the surface, hold it to the hot tip of the Hot Knife and let wax flow into the damage.
STEP 4
Remove surplus wax with the Special Filler Applicator.
Note: Sharp grooves on the flat surface, round grooves at edges.
Products Required:
STEP 5
STEP 6
Use the coarse Sanding Pad (included inside the Special Filler Applicator) to clean and degrease the surface.
Products Required:
STEP 7
Seal filled damage by misting with Acrylic Repair Lacquer (White and Light Color Finish) or Furniture Repair Lacquer from a distance of 12-16 inches – do not spray too wet.
