A highly pigmented acrylic lacquer that gives full cover with light applications. It is most commonly used for painted surfaces. For Indoor and Outdoor Use.
PF Covering Lacquer
Shake can well and spray briefly to clear the valve.
When banging of the mixing balls is audible – shake at least for another 30 seconds. Repeat this operation during processing. Process at room temperature – do not spray on cold, hot or damp surfaces. Do not use in the gasket area of windows and doors.
Sand area to be treated with 240/280 grit Dry Sandpaper first, to level off scratches and abrasions. Final sanding either with Wire Wool 000 or with the 1500 grit Sanding Pad. Remove sanding dust thoroughly. With vertical surfaces, apply several thin coats. Allow for a 20 minutes flash-off time between each coat.
Use Special Repair Lacquer Plus (indoors) or Furniture Lacquer PLUS (indoors and outdoors) or for small repairs use the Brush Pen Clear Lacquer to seal and to protect the repaired area from dust and dirt and to adjust the sheen level, if necessary. For aerosols, instead of applying a heavy coat, apply 2-3 thin misty coats from a distance of 12″-16″.
|2.75 × 2.75 × 8.0 in
Regulated as Hazardous Material: Must ship UPS Ground to the contiguous U.S. and Canada. UPS Air required for Alaska, Hawaii, Puerto Rico and other Outlying Areas, Contact Us for shipping information.