Special Filler Applicator
STEP 1
The sharp side is used to remove the Hard Wax from flat surfaces.
Products required:
STEP 2
On the dull or rounded side you will remove Hard Wax from the damaged edge.
STEP 3
Stored conveniently inside the Special Filler Applicator you will find two pieces of scotch brite. The grey is the coarser of the two.
STEP 4
The serrated edge is used to remove the wax from the grooves on the outside of the applicator.
STEP 5
Cleaning the grooves with the serrated edge.
STEP 6
You can see that the tool is in the shape of a wedge. There is an upper and lower end of this tool. The wedge end of the tools is used primarily to apply and remove Soft Wax.
STEP 7
Always apply the Soft Wax to the upper end of the wedge where more pressure can be applied when filling damage.