Soft Countertop Abrasion (Laminate - Plastic)
STEP 1
Stretch a cut to size sheet of 600 to 1000 grit Wet/Dry Sandpaper (dependent on the surface) over the Sanding Cork with Felt Pad.
During the first sanding process, sand off scratches until they are no longer visible while using plenty of Sanding Lubricant.
STEP 2
Then use the next higher grit sizes – 1000 up to 3000. To achieve the best possible result, no grit size must be left out.
Sand wet with plenty of Sanding Lubricant.
Products required:
STEP 3
From time to time, wipe area dry with the Special Cloth to check sanding result.
Products required:
STEP 4
Final dull spots on the surface resulting from sanding can be polished out with the Felt Pad and fine Polishing Paste.
Use sufficient Polishing Paste. A too dry felt may cause an irregular result.