Flooring Scratches & Holes 1
Browse:
STEP 1

Remove all loose particles and clean surface. Cut damaged edges straight down with the Edge Planer.
STEP 2

Pre-color damage in the substrate with Color Touch-Up and the Squirrel Hair Brush.
Alternate pre-coloring can be done with the Brush-Fix Pigment Pen.
STEP 3
STEP 4

Remove surplus wax with the Special Filler Applicator.
Note: Sharp grooves on the flat area, rounded grooves at edges.
Products required:
STEP 5

If necessary, grain pattern can be restored by using the edge of the Special Scraper.
For color adjustment and imitation of the grain, use Color Touch-Up or Brush-Fix Pigment Pen.
Products required:
STEP 6

Seal filled damage by misting with Special Repair Lacquer from a distance of 12-16 inches – do not spray too wet.
Products required: