Fine Scratches (PVC / Plastic)
Browse:
STEP 1
STEP 2
STEP 3

Put the end of the Special Scraper or French Curve Scraper on the surface and shave off scratches evenly from top to bottom.
STEP 4

For pre-sanding use the small Cork Block with Felt Pad and Wet/Dry Sandpaper, 600 to 1000 grit with plenty of water.
Always sand in the direction of the profile, avoid circular motions.
STEP 5

For polishing, use the small Cork Block with Felt Pad and Wet/Dry Sandpaper 1200-3000 grit with plenty of water.
Always polish in the direction of the profile, avoid circular motions.
Products required:
STEP 6

For gloss level adjustment use the small Cork Block with Felt Pad and Polishing Paste
Products required:
STEP 7