Cracks In Fitting Holes
STEP 1
STEP 2
Dye Rex-Lith Wood with Color Touch-Up. Then mix with the appropriate quantity of hardener.
STEP 3
Put a plastic cap or lid into the fitting hole and apply the Rex-Lith Gel Filler to the damaged area (mould).
STEP 4
Before the Rex-Lith has fully cured, coarse projectings can be carefully cut off with a chisel.
STEP 5
STEP 6
Stretch a piece of Sandpaper ‘dry’ tight around the Cork Sanding Block and remove final projections while sanding the surrounding area. Remove sanding dust afterwards.
STEP 7
Match filled damage to the color of the surrounding area by misting with PF Covering Lacquer from a distance of 12-16 inches – do not spray too wet. Repeat two or three times.
Products required: