Scratches on Matt Surface
Remove all loose and splintered particles.
Use the Edge Planer to press damage edges slightly down to obtain smooth transitions.
Strip off projectings in still heated condition evenly with the leading edge of the Special Filler Applicator or after cooling down (approx. 1 min.) with the Metal Planer.
Make an intermediate sealing by misting with Special Repair Lacquer from a distance of 12-16 inches – do not spray too wet.
Replicate grain using the Graining Pen.
Use Special Repair Lacquer to seal and to protect repaired area from dust and dirt and to adjust the sheen level, if necessary.
Alternatively, you can also use the Brush-Fix Clear Pen for sealing and sheen level adjustment.