Fine Scratches (PVC / Plastic)

Browse:

Fine Scratches PVC / Plastic

STEP 1

Clean the surface.

Products required:

STEP 2

Dye scratches with the Touch-Up Dye Graining Pen.

Products required:

STEP 3

Put the end of the Special Scraper or French Curve Scraper on the surface and shave off scratches evenly from top to bottom.

Products required:

-or-

STEP 4

For pre-sanding use the small Cork Block with Felt Pad and Wet/Dry Sandpaper, 600 to 1000 grit with plenty of water.

Always sand in the direction of the profile, avoid circular motions.

Products required:

STEP 5

For polishing, use the small Cork Block with Felt Pad and Wet/Dry Sandpaper 1200-3000 grit with plenty of water.

Always polish in the direction of the profile, avoid circular motions.

Products required:

STEP 6

For gloss level adjustment use the small Cork Block with Felt Pad and Polishing Paste

Products required:

STEP 7

Finally clean surface with a Cotton Cloth.

Products required:

Piano and Furniture Finish Supplies