Damaged Edges (Wood / Fiberglass)

Browse:

Damaged Edges Wood / Fiberglass

STEP 1

Clean surface and remove all loose particles.

Products required:

STEP 2

Compress damaged edges using the round side of the Edge Planer.

Products required:

STEP 3

Pre-color damage in the substrate with Color Brush Pen.

Products required:

STEP 4

Choose the appropriate color of Hard Wax Plus matching the surrounding surface, hold it to the tip of the Hot Knife and let wax flow into the damage.

Products required:

STEP 5

Remove surplus wax with the Special Filler Applicator.

Note: Sharp grooves on the flat surface, round grooves at edges.

Products required:

STEP 6

Restore the grain with the Brush Pen Glaze.

Products required:

-or-

STEP 7

Seal filled damage by misting with Furniture Lacquer from a distance of 12-16 inches – do not spray too wet.

Products required:

Piano and Furniture Finish Supplies